Larder and Butchery Equipment

STAINLESS STEEL LARDER FITTINGS

All larder fittings from simple brackets to overhead rails, swivel hooks, rollers, bends,etc built to suit location and requirements.

STAINLESS STEEL OVERHEAD RAILS AND FITTINGS

Stainless Steel Single and Double Track Rails and fittings to suit POA

Stainless Steel Single and Double Track Rails and fittings designed and built to suit location  with quotation on request with specification.   NOTE  junctions to change tracks can only be fitted in double track systems or low headroom rails

 

Stainless Steel single rail curved track section with hanger bracket

Stainless Steel single rail curved track section with hanger bracket

Stainless Steel twin track rail with hanger bracket 4 wheel ballbearing all stainless trolley and swivel hook

Stainless Steel twin track rail with hanger bracket 4 wheel ballbearing all stainless trolley and swivel hook

four wheel sealed stainless steel ball bearing trolleys for single or double track systems are the same price

four wheel sealed stainless steel ball bearing trolleys for single or double track systems are the same price

 

 TROLLEYS FOR BOTH SYSTEMS £75 00 EACH     NO VAT but  PLUS CARRIAGE                                                                                                              

SINGLE RAIL SYSTEM SUTABLE FOR LOW HEADROOM LARDERS

A STAINLESS STEEL SINGLE RAIL SYSTEM DEVELOPED TO MAKE INSTALLATION VERY SIMPLE AND TAKING UP LESS HEADROOM THAN SYSTEMS WITH ROLLERS ON TOP OF THE TRACKING,    BUILT TO SUIT INDIVIDUAL LOCATIONS

 

£

STRAIGHT RUNS (MAX LENGTH 6 metre) THOUGH TRANSPORT RESTRICTIONS CAN RESTRICT TO 2 metre WITH SUITABLE JUNCTOINS £32-00 per metre no VAT WITH FIXING LUGS WELDED ON TO SUIT LOCATION

90 degree bends (min radius 500-mm) £150-00 incl VATc/w ceiling lug welded in place to suit location

90 DEGREE BENDS (min radius 500mm) £130-00 no VAT COMPLETE WITH FIXING LUGS WELDED TO SUIT LOCATION

Junctions (L/H or R/H)       £300-00 each cord operated to change

JUNCTIONS (L/H or R/H 0 £250-00 EACH n VAT CORD OPERATED TO CHANGE TRACKS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RAIL CAN BE BOLTED TIGHT UP TO CEILING

RAIL CAN BE BOLTED TIGHT UP TO CEILING

RAIL CAN BE ATTACHED WITH 8MM BOLTS ANYWHERE ALONG ITS LENGTH

RAIL CAN BE ATTACHED WITH 8MM BOLTS THROUGH THE TOP SURFACE ANYWHERE ALONG ITS LENGTH

ONLY 7in/ 140mm ceiling to swivel hook

ONLY 7in/ 140mm ceiling to swivel hook

 

 

 

 

 

 

an alternative fixing with lugs welded or bolted to the top of the rail, preferable where long ceiling bolts are needed

an alternative fixing with lugs welded or bolted to the top of the rail, preferable where long ceiling bolts are needed

 

 

 

 

 

fail fixing with lug welded to top surface of rail.spacers through insulation and ceiling, and clamp plates on beamabove ceiling

Rail fixing with lug welded to top surface of rail.spacers through insulation and ceiling, and clamp plates on beam above ceiling

 

 

 

 

 

 

 

 

IMG_0160a

all stainless steel trolleys with sealed stainless ball bearings and stainless swivel hook

 

 

 

 

trolley bearings fit inside the rail

trolley bearings fit inside the rail

 

 TROLLEYS FOR THIS SYSTEM £65-00 EACH no VAT but plus carriage

STAINLESS STEEL GAMBRELS

13” x 8mm dia. Muntjac, CWD and Roe

£7.00 no. VAT but PLUS P&P
15” x 10mm dia. Roe, Fallow, Small Red
£9-00 no. VAT  but PLUS P&P
19” x 12mm dia. Large Fallow & Red
£10-00 no. VAT but PLUS P&P
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

GAMBREL WITH EXTRA RING

THE CORRECT PLACING OF THE HOOKS

THE CORRECT PLACING OF THE HOOKS TO TRANSFER CARCASE TO RAIL HOOK

Gambrel with extra ring, used when transferring heavy carcases from hoist hook to hanging rail hook, to prevent the two hooks jamming together, hoist hook placed in top ring, rail hook in the “vee” of the gambrel.

Add £4.00 per gambrel
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

WAAL MOUNTED GAMBREL RACK     Keeps gambrels clean and tidy, always in one place and always ready for use in 2mm 304 gradestainless,         25 gambrel capacity as shown £80-00 no vat but plus carriage

hold 25 gambrels of any size or type of our manufacture

CAN BE MADE TO HOLD ANY NUMBER OF ANY SIZE OF GAMBRELS OF OUR MANUFACTURE

holds 25 gambrels of any size or type of our manufacture for easy one site access

THIS ONE HOLDS 25 GAMBRELS OF ANY SIZE OF OUR MANUFACTURE

 

FOLDING 14″ GAMBREL  ( the original designed by David Stretton)

fits any deer, fits in any pocket.
£18.00 no. VAT but PLUS P&P
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

STAINLESS  STEEL CHEST SPREADERS

packed flat for post just bend ends as required

5″ long £3-00 no. VAT but PLUS P+P
Other sizes to order.  Min number 5 of a size POA
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

STAINLESS “RAIL”  HOOKS  FOR 2 in TUBE RAILS

Stainless “rail” hooks for hanging gambrels on chiller rails. 8mm diameter material
£4.00 each no VAT  but Plus p&p
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)                                                                                                                                

Stainless “rail” hooks

rail hooks fit and slide on 2 inch stainless tube

rail hooks fit and slide on 2 inch stainless tube,  the long tail stops the hook falling of when fitting the gambrel

 

rail hooks on tubular rails with gambrels and deer

a free standing Chiller rail system with hooks on tubular rails with gambrels and deer

 

8 mm STAINLESS “S” HOOKS FOR GENERAL USE

Small £2.20 each no. VAT but Plus p&p Large £3.00 each no VAT but Plus p&p Xlarge £3.50 each no. VAT but Plus p&p Other sizes to order, minimum 5 of a size- POA

Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

EXTRA LARGE HEAVY DUTY “S” HOOKS

10 mm Dia x 200 mm long  £7-00 each no  VAT  but Plus P & P
                              with swivel £12-00 each no  VAT but Plus P & P
Other Sizes To Order Minimum 5 Off
IMG_5364a

STAINLESS STEEL “DROP” HOOKS

For hanging small carcases on high rails 8″ £3.50 each no. VAT  but Plus p&p 10″ £4.00 each no. VAT but Plus p&p 15″ £5.90 each no. VAT but Plus p&p Other sizes to order, minimum 5 of a size  – POA Phone 01332 810757 or use our contact page to order. (CLICK ON IMAGE TO ENLARGE)

HEAVY DUTY SWIVEL DROP HOOKS

Example  10 mm dia with swivel 500 mm  long £15-00 each no VAT but Plus P&P Any size To Order Minimum 5 Off IMG_5362a

STAINLESS STEEL, CHAIN, D-LINKS, AND STAINLESS STEEL WIRE ROPE ASSEMBLIES

Any size or pattern made to order POA

Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

LARDER SCALES

6in diameter 100kg/220lbs capacity £45.00 INCL. VAT but PLUS P&P

6 in diameter 250kg/550lbs capacity
£130-00 NO VAT but PLUS P&P
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

BUTCHERS STRING

Butchers String

Food quality No.5 Rayon String

£7-00 per 1lb 3oz ball no. VAT but PLUS P&P
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

STAINLESS STEEL CHAIN MAIL GLOVES

AMBIDEXTROUS Small, Medium and Large

£60 each no. VAT but PLUS P&P
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

KEVLAR CUT RESIST GLOVES

(Resists the sharpest knife but not points) Ambidextrous, small, medium, large, extra large

A cheaper and more comfortable alternative to Chain Mail gloves
£16.00 each No. VAT but PLUS P&P
Phone 01332 810757 or use our contact page to order.
(CLICK ON IMAGE TO ENLARGE)

 

Comments are closed.