Carcase Handling Systems

IMPORTANT DATA- THE FIRM THAT MADE OUR WINCHES WENT INTO LIQUIDATION ON 1-12-2020 SO WE HAVE HAD TO FIND A NEW SUPPLIER, THE NEW WINCHESARE BETTER, WITH AUTO BRAKE, SO NO RATSHET LEVER TO GO WRONG BUT THEY COST US MORE, WE HAVE HAD TO INCREASE THE PRICE OF OUR HOISTS FROM 1-03-2021 TO COVER THIS BUT THEY ARE STILL VERY COMPETITIVELY PRICED AND EFFICIENT

OUR UPDATED TYPE BALL HITCH MOUNTED HOIST

This improved model of our tried and tested unit fits any 50mm ball on a vehicle or ATV.
Easy handling by one person of any size carcase.
Used anywhere a vehicle can get.
Sectional for compact stowage when travelling.
£210.00 NO VAT but  Plus Carriage
Phone 01332 810757 or e mail to order.

(CLICK ON IMAGE TO ENLARGE)

UPDATED BALL  HITCH HOIST WITH SWIVEL TOP BOW

A DEVELOPMENT OF THE ORIGINAL NON SWIVEL HOIST LISTED ABOVE With a swivel top to the centre pillar “bow” section. This allows a carcase to be safely loaded into/onto the vehicle the hoist is attached to by one person. It will still fit anything with a 50mm ball hitch. Different coupler pieces are available to fit any type or height of ball drawbar or ball/jaw combination drawbar to prevent it tipping sideways when swivelling, and it will take the standard skinning attachment
£280-00 NO  VAT but Plus carriage Phone 01332 810757 or e mail to order(CLICK ON IMAGE TO ENLARGE)

 OUR  COMPACT BALL HITCH HOIST NON SWIVEL OR SWIVEL TOP

A development of the above units to suit smaller vehicles and especially to stow in a smaller area for transport, still fits any vehicle with a 50mm ball hitch and can accomplish all the jobs of the others with the correct coupler to suit the drawbar involved for the swivel top version                                                 £210-00 non swivel NO VAT but plus carriage                                                                                              £280-00 swivel top  NO VAT but plus carriage

 

the optional tray support on coupler bar

the optional tray support on coupler bar


tray slid out onto support bar ready for carcase on a vehicle with side opening door


carcase tray on support bar and carcase lowered into tray

carcase tray on support bar and carcase lowered into tray


tray slid out onto optional support bar for vehicles without drop down tailgate

DIFFERENT BALL COUPLERS FOR SWIVEL TOP HOISTS TO FIT DIFFERENT DRAWBARS

IF YOUR DRAWBAR IS THIS TYPE

IF YOUR DRAWBAR IS THIS TYPE


IF YOUR DRAWBAR IS THIS TYPE

OR IF YOUR DRAWBAR IS THIS TYPE


YOU WILL NEED A TYPE  2  COUPLER WHICH FITS LIKE THIS

YOU WILL NEED A TYPE 2 COUPLER WHICH FITS LIKE THIS


IMG 4820a

to fit a type 2, slide  socket on to ball vertically


IMG 4819a

then turn coupler to horizontal to lock onto ball and lock bottom vee to base of ball

 

IF YOUR DRAWBAR IS THIS TYPE

IF YOUR DRAWBAR IS THIS TYPE


OR IF YOUR DRAWBAR IS THIS TYPE

OR IF YOUR DRAWBAR IS THIS TYPE


YOU WILL NEED A TYPE  3  COUPLER WHICH FITS LIKE THIS

YOU WILL NEED A TYPE 3 COUPLER WHICH FITS LIKE THIS SLIDE THE COUPLER VETICALLY ON TO THE BALL AND THEN  TURN DOWN TO HORIZONTAL TO LOCK ONTO THE BALL AND ENGAGE THE VEE WITH THE DRAWBAR PIN


OR TYPE 3 WHICH FITS LIKE  THIS

OR TYPE 3 WHICH FITS ON THIS TYPE DRAWBAR AS DETAILED ON THE  ABOVE PICTURE AND THEN TURNED TO FACE THE REAR TO FIT HOIST


IF YOUR DRAWBAR IS THIS TYPE

IF YOUR DRAWBAR IS THIS TYPE


OR IF YOUR DRAWBAR IS THIS TYPE

OR IF YOUR DRAWBAR IS THIS TYPE


YOU WILL NEED A TYPE 4 COUPLER THAT FITS LIKE THIS

YOU WILL NEED A TYPE 4 COUPLER THAT FITS LIKE THIS

 

IF YOUR DRAWDAR IS NOT LISTED ABOVE YOU WILL NED A UNIVERSAL COUPLER WITH FRONT LEGS

IF YOUR DRAWDAR IS NOT LISTED ABOVE YOU WILL NEED A TYPE 1 UNIVERSAL COUPLER WITH FRONT LEGS


THE TYPE 1 COUPLER FITS LIKE THIS WITH THE FRONT LEGS CUT TO SUIT

THE TYPE 1 COUPLER FITS LIKE THIS WITH THE FRONT LEGS CUT TO SUIT


WHEN THE COUPLER IS ON THE BALL THE UPRIGHT BEAM FITS LIKE THIS

WHEN ANY OF THE COUPLERS ARE ON THE BALL THE UPRIGHT BASE BEAM FITS LIKE THIS


THE SWIVEL BOOM THEN FITS ON THE BASE

THE SWIVEL BOOM THEN FITS ON THE BASE


DO NOT FORGET TO PUT THE PULLEY ON FIRST 9UNLESS YOU ARE 7 FEET TALL

DO NOT FORGET TO PUT THE PULLEY ON FIRST UNLESS YOU ARE 7 FEET TALL

 ASSEMBLY OF SWIVEL TOP HOIST AS DELIVERED

 

VEHICLE MOUNTED HOIST

Another tried and tested unit which can be made to fit into any vehicle,hard top or open back.
Easy handling of any size carcase by one person. Hand or electric winch.
Winch also loads tray and carcase into any vehicle.
Instant de-mount to leave clear vehicle when not required.
FROM £400.00 no VAT Plus Carriage – HAND WINCH
£550 no VAT Plus Carriage – ELECTRIC WINCH
Phone 01332 810757 or e mail to order.
(CLICK ON IMAGE TO ENLARGE)

VEHICLE MOUNTED HOIST

VEHICLE MOUNTED HOIST


Instant demount to leave vehicle completely clear when not required for use

Instant demount to leave vehicle completely clear when not required for use


This system can pull carcase/s in a tray into the back of a vehicle with minimum operator effort.

This system can pull carcase/s in a tray into the back of a vehicle with minimum operator effort.

ALL STAINLESS STEEL TILTING CRADLE

A new concept in easy hygienic carcase handling in the field or larder.
All Stainless Steel construction.
For rope pulley or manual lifting of smaller species
£280-00 no VAT but plus carriage
With built-in mechanical winch (zinc plated) and stainless steel rope for larger species
£315.00 no  VAT but Plus carriage
(CLICK ON IMAGE TO ENLARGE)

The Cradle Assembled Ready for Use


Winch any size   animal vertical to bleed


Tilt cradle to horizontal

Easily Tilt balanced cradle to horizontal


A secure carcase at a comfortable height to gralloch


A clean suspended gralloch with gravity to help

 
 
 
 
 
 
 
 
 
 
 

will put the carcase into a vehicle, preferably into a tray


dismantles without tools for stowage for transport

 
 
 
 
 
 
 
 
 

A TILTING CRADLE SPECIFICALLY FOR QUAD BIKES

This version of our stainless steel titling cradle clamps to the rear carrier of the quad (or front carrier if preferred) to enable clean, easy processing, and then safe loading, by one person, of any deer carcase for transport.
£380-00 no. VAT but Plus carriage
Four easy steps from field to larder
(CLICK ON IMAGE TO ENLARGE)

Drive alongside carcase & position side support to eliminate suspension movement


Tilt cradle to vertical and winch carcase up to bleed, gralloch, while suspended and to load


Tilt cradle easily to horizontal position to load safely, without strain onto quad for transport


Secure carcase to cradle if required for rough terrain, stow side support and drive away

Comments are closed.